| The SC3500 is a modular,
high performance solid state flash drive in a 3.5 inch
halfheight drive format, designed for implementation on systems
conforming to the SCSI-2 standard.
Composed of a large array of 1 Gbit NAND E2PROM memories, the SC3500
can emulate the storage and retrieval operations of a standard rotating drive,
but with faster access, throughput, ruggedness and reliability.
Rugged, 3.5” half height drive formfactor with single
ended 50-pin, 2.54 mm
SCSI-2 interface.
Up to 36 GByte uncompressed capacity.
For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Extended (–20°C to +75°C)
Industrial (–40°C to +85°C)
Storage temperature (non-operating) from –55°C
to +125°C.
Completely solid state – no moving parts.
Active Remap™ for exceptional data reliability.
5 volt, low power operation.
500 G operating shock; 10 G operating vibration.
0.5 millisecond random access time.
2.3 MByte/sec sustained read throughput; 1.0 MByte/sec sustained
write throughput.
10 year data integrity.
8 year product warranty.
Exclusive distributor for Germany,
Austria and Switzerland is altec ComputerSysteme
GmbH.
| |
Versions (with item number)
512 MB SC3500 Sidewinder – 57MT512
1024 MB SC3500 Sidewinder – 57MT10
2048 MB SC3500 Sidewinder – 57MT20
4096 MB SC3500 Sidewinder – 57MT40
8192 MB SC3500 Sidewinder – 57MT81
16384 MB SC3500 Sidewinder – 57MT163
24576 MB SC3500 Sidewinder – 57MT245
36864 MB SC3500 Sidewinder – 57MT368
Other memory capacities as shown above are also available. Please
ask for further details.
What are Solid State Disks?
The common feature of all Solid State Disks is that the data
is stored on Flash chips. Solid State Disks are
insensitive to shock, vibration, temperature effects and
extreme air pressure changes and are highly resistant to
EMC and ESD.
Solid State Disks do not have sensitive
rotating components. They are totally silent in
operation and have a low current consumption.
You can write, read and delete the data just like
a conventional hard disk. Mechanical hard disks
in mobile systems and industrial computers can be replaced
by pin-compatible Solid State Disks.
Memtech Solid State Disks
A Wear-Leveling Algorithm is implemented
in all drives, as well as the Kicker™ Hold
Up Circuit intended to prevent drive destruction if
writing is suddenly interrupted.
Every drive is subjected to Memtech’s exacting EnduroTest™ in
which each drive is fully tested under environmental and
voltage extremes to guarantee data integrity under even the
harshest conditions.
Optionally, all products are available with a Security
Erase feature and with a Conformal
Coating to protect them against moisture. | |
