|
The AT2580 Panther solid-state flash drive is a UDMA-66 compliant IDE memory
module offered in an extremely low profile 2.5 inch drive form-factor with read/write
performance up to 40 MB/sec.
2.5" Drive with 44-pin IDE UDMA-66 interface
and 2 mm
grid. ATA-5 compliant, PIO Mode 0-4 and UDMA Mode 0-4
Support.
Available in standard capacities ranging from 4 to 64 GB,
all in the same, 9.5 mm low profile solution using SLC
(Single Level Cell) NAND Flash.
For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Extended (–20°C to +75°C)
Industrial (–40°C to +85°C)
Storage temperature (non-operating) from –55°C
to +125°C.
Completely solid state – no moving parts.
Powerful ECC (32 Bit Reed-Solomon) and proprietary
wear leveling for exceptional data reliability.
SMART (Self-Monitoring, Analysis and Reporting Technology)
compliant.
5 volt, low power operation.
Shock 1500 G (operating); Vibration 16,3 G random
(operating).
Up to 40 MByte/sec sustained Read/Write performance; 20 MByte/sec
(AT2582 Panther), 30 MByte/sec (AT2583 Panther), 40 MByte/sec
(AT2584 Panther).
Erase/Write endurance 8 million cycles.
10 year data integrity.
7 year product warranty.
Exclusive distributor for Germany,
Austria and Switzerland is altec ComputerSysteme
GmbH. | |
Versions (with item number)
4096 MB AT2582 Panther – 20 MB/s –
10MT40
8192 MB AT2582 Panther – 20 MB/s –
10MT81
16384 MB AT2582 Panther – 20 MB/s –
10MT163
32768 MB AT2582 Panther – 20 MB/s –
10MT327
65536 MB AT2582 Panther – 20 MB/s –
10MT655
6144 MB AT2583 Panther – 30 MB/s –
11MT61
12288 MB AT2583 Panther – 30 MB/s –
11MT122
24576 MB AT2583 Panther – 30 MB/s –
11MT245
8192 MB AT2584 Panther – 40 MB/s –
12MT81
16384 MB AT2584 Panther – 40 MB/s –
12MT163
Other memory capacities as shown above are also available. Please
ask for further details.
What are Solid State Disks?
The common feature of all Solid State Disks is that the data
is stored on Flash chips. Solid State Disks are
insensitive to shock, vibration, temperature effects
and extreme air pressure changes and are highly resistant
to EMC and ESD.
Solid State Disks do not have sensitive
rotating components. They are totally silent in
operation and have a low current consumption.
You can write, read and delete the data just like
a conventional hard disk. Mechanical hard disks
in mobile systems and industrial computers can be replaced
by pin-compatible Solid State Disks.
Memtech Solid State Disks
A Wear-Leveling Algorithm is
implemented in all drives, as well as the Kicker™ Hold
Up Circuit intended to prevent drive destruction
if writing is suddenly interrupted.
Every drive is subjected to Memtech’s exacting EnduroTest™ in
which each drive is fully tested under environmental and
voltage extremes to guarantee data integrity under even
the harshest conditions.
Optionally, all products are available with a Security
Erase feature and with a Conformal
Coating to protect them against moisture. |
|
