| The AT3550 solid-state
flash drive is an UDMA-66 compliant IDE memory module offered
in an extremely low profile 3.5 inch drive form-factor.
The primary storage media in the drive is sector-erasable
NAND E2PROMs (Flash). Using these devices, Memtech is able
to deliver up to 60 GBytes of uncompressed, non-volatile
solid-state storage in an extremely small, rugged form-factor.
Low profile 3.5" drive form-factor with 40-pin, 2.54 mm
grid UDMA-66 compliant IDE interface.
12 GByte capacity under 16 mm; 20 GByte
capacity under 20 mm; 60 GByte
maximum capacity.
For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Extended (–20°C to +75°C)
Industrial (–40°C to +85°C)
Military (–55°C to +125°C)
Storage temperature (non-operating) from –55°C
to +125°C.
Completely solid state – no moving parts.
16 byte CRC/ECC and Active Remap™ for exceptional
data reliability.
5 volt, low power operation.
2000 G operating shock; 20 G operating vibration.
0.1 millisecond random access time.
26 MByte/sec cached read performance.
20 MByte/sec cached write performance.
8 year product warranty.
8 million erase/write cycle endurance.
Exclusive distributor for Germany,
Austria and Switzerland is altec ComputerSysteme
GmbH.
| |
Versions (with item number)
2048 MB AT3550 Wolverine –
45MT20
4096 MB AT3550 Wolverine –
45MT40
8192 MB AT3550 Wolverine –
45MT81
16384 MB AT3550 Wolverine
– 45MT163
32768 MB AT3550 Wolverine
– 45MT327
49152 MB AT3550 Wolverine
– 45MT491
61440 MB AT3550 Wolverine – 45MT614
Other memory capacities as shown above are also available. Please
ask for further details.
What are Solid State Disks?
The common feature of all Solid State Disks is that the data
is stored on Flash chips. Solid State Disks are
insensitive to shock, vibration, temperature effects
and extreme air pressure changes and are highly resistant
to EMC and ESD.
Solid State Disks do not have sensitive
rotating components. They are totally silent in
operation and have a low current consumption.
You can write, read and delete the data just like
a conventional hard disk. Mechanical hard disks
in mobile systems and industrial computers can be replaced
by pin-compatible Solid State Disks.
Memtech Solid State Disks
A Wear-Leveling Algorithm is
implemented in all drives, as well as the Kicker™ Hold
Up Circuit intended to prevent drive destruction
if writing is suddenly interrupted.
Every drive is subjected to Memtech’s exacting EnduroTest™ in
which each drive is fully tested under environmental and
voltage extremes to guarantee data integrity under even
the harshest conditions.
Optionally, all products are available with a Security
Erase feature and with a Conformal
Coating to protect them against moisture. | |
